How to create iscsi target in windows 7

Install Window 7 into this partition. Open the local area connection network properties and configure as bellow: Figure 7 Click "Properties". Figure 10 Double click the client to edit and check both "Enable Upload Image" and "Keep Write-back File" Figure 11 , when press "save" button it will ask you "Are you sure to delete write-back file? Launch ccbootsetupclient. Then launch CCBoot client and you will see the main interface as bellow Figure After finished, it will require reboot system.

Reboot the client PC. Input the image file name as you wish in the "Image File Name". Note: CCBoot supports two types of image file format.

It supports ". Supports Shared Volumes for clustering servers. This allows you to completely eliminate the need for dedicated hard disk drives installed on client machines. Export an entire disk or a single file or partition on the hard disk as an iSCSI virtual disk. StarWind Hot Links. Storage Spaces maintains the health of these drives and any redundancy selected.

DPM can use a volume in this storage for backup of other servers and applications. The business objective is to efficiently use storage that already exists on the network, without for example, growing a conventional SAN.

Proceed to create virtual disks after completing the Storage Pool Wizard. The New Virtual Disk Wizard will launch. Select the storage pool created in step 2 and name the volume. Select either Simple, Mirror, or Parity storage layout. Since this storage space in this environment includes three 3 or more hard disks, the parity type is a good choice.

Next select either Thin or Static Thick provisioning for the volume. Leave this field empty. Home About. Here you can configure CHAP authentication, but it is optional in the test environment.

Click Rescan. Related Reading.