Crate tx50db manual

Connect a microphone to the Low Z jack. Crwte Popular Answered Unanswered. Never spray cleaning agents directly onto the cabinet, and stay away from abra- sive cleansers which could damage the finish. The LED illuminates red when the battery needs recharging. Ask a Question Usually answered in minutes! Connect a high impedance microphone to the Instrument Input jack.

To keep the cabinet in top condition, wipe it clean with a damp, lint-free cloth to remove dirt and road film. Not only is the TX50D compact and portable, it also sports two separate channels and the incredible sound that has made Crate a household name among musicians. Connect a tape player for sound tracks and back up music to the CD Input jacks. The LED near the charger jack will glow red while the amp is charging and goes out when the amp is fully charged.

At last, you can take your music with you and have great tone on the road. This indicates an exhausted battery — one which may not take a charge. The TX50D uses a sealed lead-acid volt battery as its internal power source.

Small reverb effect Manua, When this happens, turn the amp off, connect the volt charger to the charger jack and plug it in.

A pair cratr stereo headphones may be connected to the Headphones jack for privacy. Crate Music Answered on Feb 21, At last, you can take your music with you and have great tone on the road.

Crate Music Posted on Mar 21, Be the first to answer. Please assign your manual to a product: Page of 12 Go. Crate Music Posted on Apr 24, Be the first to cratd. Use this control to adjust the xrate of the mic channel.

Make certain that the polarity on the adapter matches what is shown below. Not only is the TX50D compact and portable, it also sports two separate channels and the incredible sound that has made Crate a household name among musicians. Most Popular Question crate tx50 db dsp not work Music. To print the manual manuall, please, download it. This LED illuminates yellow when the power switch is at the on position — when the amp is fully charged.

This indicates an exhausted battery — one which may not take a charge. The output of the CD or tape player may need to be attenuated for a suitable mix with the input channels — see the notes on page Ask a Question Usually answered in minutes! Use these ideas to fuel your imagination for the setup which best suits your needs.

Never spray cleaning agents directly onto the cabinet, and stay away from abra- sive cleansers which could damage the finish. Connect a low impedance microphone to the Low Z jack. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

Connect a tape player for sound tracks and back up music to the CD Input jacks. No effect applied SLAP: Audio Amplifier Products meet the regulations for compliance marking under: Is this the input jack failing tx50dbb one of the knobs 1.

Comments to this Manuals Your Name. Use this control to adjust the output level of the instrument channel 1. If the LED never illuminates, the rx50db may need replacing. Not only is the TX50D compact and portable, it also sports two separate channels and the incredible sound that has made Crate a household name among musicians. Use these ideas to fuel your imagination for the setup which best suits your needs.

Not only is the TX50D compact and portable, it also sports two separate channels and the incredible sound that has made Crate fx50db household name among musicians. The LED will change to red when the battery is low and needs recharging. Use this jack to connect a footswitch to the amplifier for remote control of the Instrument channel selection and turning the DSP on and off. This LED illuminates yellow when the power switch is at the on position — when the amp is fully charged.

Use this control to adjust the mid frequency level for the instrument channel 2. Hope one of these works. Use this switch to select channel 1 tx50cb 2 for the instrument input. If the battery is drained too low, the Power LED will go out. Rotating this control counter clockwise enhances mid frequencies; rotating it clockwise enhances the low and high frequencies.

The Insert jack 8 lets you patch external effects into the amplifier just prior to its nanual amp stage, as shown below. Are you a Crate Music Expert? A pair of stereo headphones may be connected to the Headphones jack for privacy. The TX50D uses a sealed lead-acid volt battery as its internal power source. Finally — manuak pros just plug into the crste jack on the rear panel and control the volume and tone through their instruments. Use this control to adjust the low frequency level for the instrument channel 2.